Aluminum Casement Window

Extruded aluminum sections and finishes coordinated with the architecture.

THERMAL-BREAK CONCEPT

Aluminum Insulating connector

Aluminum

An insulating connector separates inner and outer aluminum sections where a thermal-break system is specified.

ALUMINUM PROFILE

FRAME FINISH

The section defines frame depth, glazing support, sash geometry and connection details.

Confirm coating, color sample, profile series and any thermal-break requirement with the quotation.

FRAME FINISH IDEAS

Dark grey White Black

Digital color swatches are indicative. Confirm physical finish samples for the selected system.

Choose the glass construction with the room, climate and selected casement system.

INSULATED GLASS UNIT

Glass pane Spacer cavity Glass pane

Illustrative glass-unit section

THERMAL PERFORMANCE

SOUND CONTROL

Low-E coatings and insulated glazing can be reviewed for heating, cooling and solar-control needs. Confirm compatibility with sash weight and hardware.

Pane thickness, interlayers, seals and installation all affect sound reduction. Ask for a complete tested specification when acoustic performance matters.

Specify the complete window.

Review frame, glazing, seals, size and installation together. Performance information should relate to the selected configuration.

Double or triple glazing may be possible where the chosen system permits. No fixed thermal or acoustic rating is implied.

Tempered glass

Low-E glass

Laminated glass

Heat-treated glazing. Confirm safety-glass requirements for the opening.

A coating option for insulation and solar-control needs.

Glass plies bonded with an interlayer; select build-up by use.

Frosted glass

Insulated glass

Tinted glass

Translucent finish where visual privacy is preferred.

A sealed multi-pane unit with a spacer cavity.

Color and appearance choice for the facade and daylight brief.

Glass thickness, pane build-up, tint and coating are coordinated with sash size and hardware.

Hinges, handles, seals, screens and drainage are coordinated as one system.

Designed around outward swing. The sash pivots on side hinges. Hardware selection depends on size, weight, opening angle and the frame series.

Specify glass, gaskets and screen position together with the chosen operable and fixed lights.

HINGES & STAYS

HANDLE & LOCK

SEALS & DRAINAGE

Confirm load and opening angle.

Locate operating hardware.

Review the system details.

Hardware, sealing and performance data should be confirmed for the selected frame, glass build-up and installation.

Open outward. Keep the room clear.

Side-hinged sashes provide a practical ventilation opening while keeping the operating leaf outside the room. Choose the layout, screen, glass and frame finish for each elevation.

SINGLE SASH

DOUBLE SASH

FIXED + OPENING

SCREENS

One side-hinged leaf

Paired outward leaves

Views with ventilation

Configured by design

Locate the hinges, handle, opening side and any fixed lights before approving the elevation.

SINGLE SIDE-HUNG

DOUBLE SIDE-HUNG

One outward-opening leaf.

Paired leaves open outward.

OPENING DIRECTION

The supplied exterior examples show the leaf opening away from the interior. Confirm hinge side and clear swing space against the actual installation drawings.

EXTERIOR VIEW / ILLUSTRATIVE

Keep the sash, restrictors and external obstructions in the approval drawing.

Select active sashes, fixed lights and transoms to match each room.

SINGLE CASEMENT

DOUBLE CASEMENT

Fixed + side-hung opening

Paired outward leaves

SIDE VENTS

COMPACT VENT

Fixed center with two opening sides

Smaller opening beside fixed glazing

Identify each window and state the measurement units clearly.

W – FRAME WIDTH

H / HEIGHT

Frame dimensions and wall opening are separate measurements.

01 Opening width x height

02 Measurement units

Provide clear wall opening and frame size if specified.

Use mm or inches consistently and number each opening.

03 Wall and sill detail

04 Opening operation

Include wall depth, sill height, reveal and fixing conditions.

Mark hinge side, active leaves, fixed lights and swing direction.

Add drawings and site photographs.

Show the openings, quantities, surrounding finishes and any glass or hardware requirements.

Review the hinge side and fixed-light layout before approving the product schedule.

Illustrative elevation

SINGLE SIDE-HUNG

Confirm one operating sash and the direction of outward swing.

Illustrative elevation

FIXED CENTER / SIDE VENTS

Identify the central fixed light, active side leaves and screen positions.

Inquiry and brief

Opening measurements

Layout review

Specification approval

Order confirmation

Production and checks

Protection and packing

Dispatch planning

WHY COORDINATE THE PROJECT?

Product selection

Drawing review

Hardware planning

Match opening, glass and finish.

Link layouts to each opening.

Confirm hinge and locking details.

Material choices

Packing support

Care information

Review profiles and glass together.

Organize by delivery schedule.

Keep supplied care guidance.

Protect glass edges, frame finishes and operating parts during handling.

01 Finish protection

02 Unit separation

Protect coated surfaces, corners and glass edges.

Pad contact areas and organize by opening number.

03 Hardware organization

04 Shipment planning

Secure handles, screens and loose accessories as specified.

Confirm destination, unloading access and delivery timing.

Prepared around your installation schedule.

Keep the unit list linked to the approved opening schedule so each window can be identified on arrival.

Packing photograph is illustrative.

Bring reference images, measurements and specification choices together.

01 PRODUCT SELECTION

02 DRAWING COORDINATION Review width, height, sill level, fixing and the outward swing path.

03 ORDER PREPARATION

Choose opening layout, sash positions, finish and glazing appearance.

Confirm glass build-up, screens, locks, quantities and shipment needs.

Consultation photograph is illustrative.

Clarify product choices before requesting a quotation.

Which casement layouts are shown?

Which way do the sashes open?

The supplied set includes single and double side-hung windows, fixed-center layouts, side vents and transoms.

The exterior examples are outward-opening. Confirm hinge side, swing clearance and hardware on the chosen elevation.

Can a screen be included?

Can grids or fixed lights be added?

Screen arrangements vary by system. Specify screen position, mesh and frame color with the selected layout.

Mark all glazing bars, transoms, side lights and fixed sections on the approval drawing.

Which glass options can be reviewed?

Can sizes and finishes be customized?

Tempered, Low-E, laminated, frosted, insulated and tinted glass may be discussed subject to system compatibility.

Send dimensions and a finish reference. Feasibility depends on the selected profile, sash size and hardware.

How is performance confirmed?

What should I send first?

Request applicable test information for the selected frame, glazing, dimensions and installation conditions.

Start with width, height, units, quantity, destination, opening direction, drawings and preferred product images.